The serial number prefixes listed on the front of this manual indicate the versions of the supplies that were available when the manual was issued. If the serial prefix of your supply is not listed in this manual, the manual may include a yellow "Manual Change’’ sheet. That sheet updates this manual by defining any differences between the version of your supply and the versions included here, and may also include information for correcting any manual errors. Note that because not all changes to the product require changes to the manual, there may be no update information required for your version of the supply.
GP-IB Interconnection Cables and Connectors
Cables for interconnecting
Model
Agilent 10833A
Agilent 10833B
Agilent 10833C
Agilent 10833D
Agilent 10834A
Agilent
The Agilent 10834A extender was designed to help in cases where rear panel space results in difficult cabling situations. The extender provides clearance by extending the first connector block 2.3 cm away from the rear panel of the instrument.
Serial link cables may be used to connect power supplies together when programming with SCPI. With serial link cables, you can connect up to 15 additional power supplies per
GP-IB Compatibility
The system power supplies implement the following
SH1(Source Handshake) | RL1(Remote Local) |
AH1(Acceptor Handshake) | PP1(Parallel Poll) |
T6(Talker) | DC1(Device Clear) |
L4(Listener) | DT1(Device Trigger) |
SR1(Service Request) |
|
Ordering Additional Manuals
One Operating manual is shipped with each power supply. Additional manuals may be purchased directly from your local Agilent Technologies Sales office. Specify the model number, serial number prefix, and the manual part number provided on the title page. (When ordered at the same time as the power supply, additional manuals may be purchased by adding Option 910 to the order. Each Option 910 includes one Operating and one Service Manual).
