Xantrex Technology 815-3012 manual Setting the Time and Date, Using the STBY/ON Fault Clear Button

Freedom SW 3K2K InvChg Owners Guide.book Page 23 Wednesday, October 9, 2013 1:34 PM

Operating the Freedom SW with the SCP

Setting the Time and Date

Freedom SW advanced features such as time-stamped events (faults, warnings, and logged historical data) require that the system be set to the correct time. The Xanbus SCP has an internal clock that controls the time for all Xanbus-enabled devices in the system. You can set the time, time format, and date on the Clock menu. The Clock menu is accessible on the Select Device menu.

For more information, see refer to the Xanbus SCP Owner’s Guide.

Using the STBY/ON Fault Clear Button

The STBY/ON Fault Clear button has two functions.

The STBY/ON Fault Clear is used to clear active faults on the system if pressed momentarily. It also toggles all Xanbus-enabled devices on the system between Operating and Power Save (Safe) mode when held down for more than five seconds.

AC In/Charge

Inverter On

Low Battery

Fault

STBY/ON

Fault Clear

STBY/ON Fault Clear

Button

EnterFunc

Xanbus System Control Panel (SCP) FGA: 809 -0921

Figure 12 Xanbus SCP STBY/ON Fault Clear Button

97-0019-01-01 23