Freedom SW 3K2K InvChg Owners Guide.book Page 17 Wednesday, October 9, 2013 1:34 PM
Operating the Freedom SW with the SCP
Item | Description |
1AC In/Charge light indicates that qualified AC is present at the input of an inverter/charger. When the Freedom SW is connected to a qualified AC source like the utility grid or a generator, this light on the SCP illuminates.
2Inverter On light illuminates when the Freedom SW is inverting using battery power.
3Low Battery light illuminates when the battery voltage on the Freedom SW is low.
4Fault light indicates a condition that requires user attention and intervention. The Fault light illuminates when any
5STBY/ON Fault Clear button is used to clear active faults on the system if pressed momentarily. It also toggles all
6Screen displays menus, settings, and system information. Displays a menu screen title, four lines of menu items, and a line that contains small arrows that depict pointers to SCP buttons.
Item | Description |
7Func button:
•Cancels selection of a menu item.
•Returns you to the previous screen.
•Changes the functions of the Up and Down arrow buttons.
8(and 9) Down (and Up) arrow buttons:
•Scrolls down (up) one line of text.
•Decreases (increases) a selected value.
When the Func button is pressed to select:
•“Shr” - the down (and up) arrow buttons increment (decrement) shore power breaker capacity on a Freedom SW inverter/chargera.
•“AGS” - the down (and up) arrow buttons switch between different AGS Start modes (Auto, Manual- On,
•“Home” - the down (and up) arrow buttons enable or disable the inverter.
See “Soft Key Navigation” on page 20 for more information.
10Enter button:
•Confirms selection of a menu item.
•Moves you to the next screen.
a.If the Freedom Sequence power manager is installed in the power system, the shore breaker capac- ity on the power manager is adjusted but not the inverter/charger.
|
| 17 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|