Freedom SW 3K2K InvChg Owners Guide.book Page 16 Wednesday, October 9, 2013 1:34 PM
Operating the Freedom SW with the SCP
Using the Xanbus SCP
As shown in Figure 5, the SCP has these important features:
Display screen System information is shown on the display screen with an adjustable backlight.
Indicator lights Four indicator lights on the front panel indicate the operating status of the Xanbus system.
Push buttons Four push buttons allow you to select device menus and change or display settings. The red STBY/ON Fault Clear button toggles the SCP and
Disabling a function When a function is disabled, it is not allowed to occur and if it is occurring, it is terminated. Regardless of other conditions, the function will not be activated. For example, even if AC power is present, if the charger is disabled, the unit will not charge.
NOTE: All functions on the front panel can also be controlled from the SCP.
mode, if held down for more than three seconds. The button can also be used to clear any active faults or warnings by momentarily depressing the button.
System Control Panel
The Xanbus System Control Panel (SCP) provides configuration and monitoring capability for all
The front panel of the Freedom SW provides limited control, including reset; charger enable and disable; and inverter enable and disable.
1 | 2 | 3 | 4 |
AC In/Charge |
Inverter On |
Low Battery |
Fault |
STBY/ON |
Fault Clear |
5
6
Enabling a function When a function is enabled, it is allowed to occur but other conditions may have to be met before the function is activated or turned on. For example, the charger function on the Freedom SW may be enabled, but it will not charge unless qualified AC power is present.
EnterFunc
Xanbus System Control Panel | (SCP) |
| FGA: 809 |
|
|
|
|
|
|
|
|
10 9 8 7
Figure 5 Xanbus System Control Panel (SCP)
|
| 16 |
|
| Freedom SW Owner’s Guide |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
