Xantrex Technology 815-2024, 815-3024, 815-3012 manual To view a fault list, To view a warning list

Freedom SW 3K2K InvChg Owners Guide.book Page 69 Wednesday, October 9, 2013 1:34 PM

Troubleshooting

Table 2 Faults Types and Behaviors				Warning Types
Fault type		Behavior		There are two types of warnings: automatic and manual. When the Freedom
Escalating automatic		Clear automatically if the fault condition goes		SW detects a warning condition, it displays a warning message on the SCP.
faults		away, just like an automatic fault.
				Table 3 describes how they differ in their behavior and in how you can
		However, if an escalating automatic fault
				respond to them when they appear on the SCP.
		occurs several times within a defined time
		period, the escalating automatic fault becomes a		Table 3 Warning Types and Behavior
		manual fault, requiring user intervention. For
				Warning type			Behavior
		example, if three faults occur in one minute, it
		will no longer clear itself but becomes a manual
				Automatic warning			Clears automatically if the fault condition that
		fault. Then you must identify the problem,					generated the message goes away. You can also
		correct the fault condition, and clear the fault or					acknowledge automatic warnings without
		reset the device.					waiting for them to clear automatically.
To view a fault list:				Manual warning			Requires you to acknowledge it before you can
							proceed with configuring or operating the
1.	On the Select Device menu, highlight System and press Enter.						Freedom SW. Manual warnings are usually in
							the form of a
2.	On the System Settings menu, highlight View Fault List.
							Yes/No question that you may acknowledge by
3.	Press Enter.
							pressing the Enter button on the SCP for Yes
							and the Func button for No.
							Refer to the Xanbus System Control Panel
							Owner’s Guide for more information.
				To view a warning list:
			1.		On the Select Device menu, highlight System and press Enter.
			2.		On the System Settings menu, highlight View Warning List.
			3.		Press Enter.
97-0019-01-01						69