Freedom SW 3K2K InvChg Owners Guide.book Page 35 Wednesday, October 9, 2013 1:34 PM
Configuring the Freedom SW using the SCP
When to set up Search mode The search mode feature is only valuable if the inverter can spend a fair amount of time “sleeping” each day. Therefore, if search mode is to be used it must be adjusted properly. The initial adjustment should be made so that the inverter comes on only when needed.
Certain types of loads can cause search mode to work unexpectedly. These types of loads are described “Inverter Applications” on page 66. If these kinds of loads are in the system, follow the suggestions given to eliminate the problem.
If the problem loads cannot be eliminated, there are two
1.Disable search mode from the main Freedom SW Setup menu, causing the inverter to always remain at full output voltage.
2.Use a
NOTES:
•Search mode, by function, cannot work with clocks and timers or devices that need power 24 hours a day. Examples of devices with timers include video recorders, coffee makers with brew timers, refrigerators, and freezers with defrost timers. Examples of devices that need power 24 hours a day include telephone answering machines, alarm systems, motion detection lights, and some thermostats.
•When the inverter is searching the output for loads, lights that have a wattage lower than this setting may flash momentarily.
|
| 35 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|