Freedom SW 3K2K InvChg Owners Guide.book Page 33 Wednesday, October 9, 2013 1:34 PM
Configuring the Freedom SW using the SCP
To select and change a configurable setting:
1. | On the setup menu, press the down arrow (or up arrow) button to |
| highlight the setting you want to change. |
2. | Press Enter to highlight the current value of the setting. |
3. | Press the up arrow or the down arrow button to change the value. Hold |
| down the button to scroll through a large range of values quickly. |
| The previously set value (or default value) appears with an asterisk (*) |
| beside it. |
4. | Press Enter to select and confirm the value. |
FSW3012 00: SetupFSW3012 00: Setup
Mode |
| Invert | Inverter | [Enabled] | |
Battery | 13.4V | 0.0A | N/A | Search Mode | [Enabled] |
Load | 115W | 120V | 12A | Charger | [Enabled] |
AC In | 120V | 15A | 60Hz | Force Chg |
|
|
| 1 Scroll down using | 2 Press Enter to change | ||
|
| the Down arrow button. | the value. |
|
5. If you have another setting to change, return to step 1. |
If you have no more settings to change, press Func until the Xanbus |
SCP displays the desired screen or menu. |
IMPORTANT: If you have no more settings to change, it is recommended to leave the Setup menu in the basic settings format to help prevent unintended configuration. If the Setup menu displays Advanced Settings, press Enter + up arrow + down arrow at the same time. The Setup menu should then display Basic Settings as the last item on the
FSW3012 00: Setup
Inverter | [Enabled] |
Search Mode | [Enabled] |
Charger | [*Enabled] |
Force Chg |
|
4 Press to
confirm the 3 Use these buttons to
value. scroll through available
values.
FSW3012 00: Setup
Inverter | [Enabled] | |
Search Mode | [Enabled] | |
| [Disabled] | |
Charger |
| |
Force Chg |
|
menu.
Figure 18 Selecting and Changing a Configurable Setting
|
| 33 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|