Freedom SW 3K2K InvChg Owners Guide.book Page 19 Wednesday, October 9, 2013 1:34 PM
Operating the Freedom SW with the SCP
Select Device Screen As mentioned, this screen appears when the Enter button is pressed from the System Status screen. It lists all
To display the Setup menu for a device:
◆ Highlight the device name on the Select Device menu screen and |
press Enter. |
From the device Home screen, press Enter. |
AC In/Charge | System Status |
|
| STBY/ON | ||
Inverter On | Battery 12.1V | 84”F | ||||
Fault Clear | ||||||
Low Battery | BatLev |
| Invert |
| ||
Load | 120V |
| 12A |
| ||
Fault | AC In | 0V |
| 0A |
| |
menu | EnInv | EnChg | Shr |
| ||
|
| |||||
|
|
|
| Func |
|
Xanbus System Control | FGA: 809 |
Press Enter button to go to the
Select Device menu screen.
Select Device
System Settings FSW3012 00 XAGS 00
XSCP
AC In/Charge | FSW3012 00: Setup |
| STBY/ON | ||
|
| ||||
Inverter On |
|
|
|
| |
Mode |
| Invert | Fault Clear | ||
Low Battery | Battery | 13.4V | 0.0A | N/A |
|
Load | 115W | 120V | 12A |
| |
|
| ||||
Fault | AC In | 120V | 15A | 60Hz |
|
| Enter |
|
| Func |
|
FSW3012 00: Setup
Mode |
| Invert | |
Battery | 11.8V | N/A | |
Load | 900W | 120V | 7A |
AC In | 0V | 0A | 0Hz |
Figure 8 Freedom SW Select Device Screen
Xanbus System Control Panel (SCP) | FGA: 809 |
To display the Select Device menu:
◆While viewing the System Status screen, press Enter.
Figure 9 Freedom SW Device Screen
Device Setup Screen The Device Setup screen is shown when a Xanbus- enabled component is selected from the Select Device screen. For example, below is an example of a Device screen for the Freedom SW 3012 inverter/ charger. Device Setup menus display status information and changeable settings. Changeable settings are identified by the square brackets [ ] around values in the
|
| 19 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|