Freedom SW 3K2K InvChg Owners Guide.book Page 37 Wednesday, October 9, 2013 1:34 PM
Configuring the Freedom SW using the SCP
Changing Freedom SW Basic Settings
Basic Settings menu The Freedom SW configuration settings can be viewed in basic format (see “Selecting Basic Settings From the Device Setup Screen” on page 37). The basic settings include configuration items you may have to adjust routinely, or as part of initial setup. It provides access to basic control of the inverter/charger.
To select the Basic Settings menu screen:
1.On the FSW3012 00:Setup screen (Figure 19), press the down arrow button until Basic Settings is highlighted.
FSW3012 00: Setup
Desired Mode | [Standby] |
Clear Faults Warnings
View Device Info
Basic Settings
The Freedom SW basic settings include menus for configuring:
•Battery type
•Battery capacity
•Maximum charging rate
•Charging cycle
•Recharging volts
•AC In breaker rating
•Low battery cutout value
See Table 7, “Basic Settings” on page 39 for information on each setting.
Figure 19 Selecting Basic Settings From the Device Setup Screen
2.Then, press Enter to display the
FSW3012 00: Basic screen which is the basic settings menu screen.
3.Press the Up and Down arrow buttons to move between selectable fields.
|
| 37 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
