Configurable Settings Status
FSW3012 00: Setup
Mode |
|
| Invert | |
Battery | 11.8V | N/A | ||
Load | 915W |
| 120V | 7A |
AC In | 0V |
| 0A | 0Hz |
Advanced Settings |
| |||
Inverter |
|
| [Enabled] | |
Search Mode |
| [Disabled] | ||
Charger |
|
| [Disabled] | |
Force Chg State |
|
| ||
Equalize |
|
| [Disabled] | |
Desired Mode |
| [Standby] |
Clear Faults Warnings
View Device Info
Basic Settings
Line 1
Line 2
Line 3
Line 4
Line 5
Line 6
Line 7
Line 8
Line 9
Line 10
Line 11
Line 12
Line 13
Line 14
Line 15
NOTE: The Xanbus SCP only displays four lines of the device Setup menu at once. To view configurable settings, press the Down arrow button.
*appears only when Enter, Up, and Down arrow buttons are pressed together.
Figure 17 Freedom SW Device Setup Menu
As discussed in “Reading the Freedom SW Device Setup Screen” on page 25 the Freedom SW Device Setup menu screen has two segments. The first segment (lines 2 to 5) displays status information and appears first in the screen’s initial four lines. The second segment (lines 6 to 15) contains selectable fields which are configurable settings.
32