Feature, Specification | Cisco Systems 6500 specs

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6506 Switch

Table 1-7 Catalyst 6506 Switch Features (continued)

Feature

Modules

Descriptions

•Chassis supports up to five Catalyst 6500 series modules.

•WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be installed in slot 5 or slot 6.

•Some Catalyst 6500 series modules:

–Are not supported

–Require that you install a Supervisor Engine 720

–Have chassis slot restrictions

–Require a specific software release level

Check your software release notes for specific information on supported modules.

Table 1-8 Catalyst 6506 Switch Specifications

Item	Specification

Environmental
Temperature, operating	Certified for operation: 32° to 104°F (0° to 40°C)
	Designed and tested for operation: 32° to 130°F (0° to 55°C)
	Note The Catalyst 6500 series switches are equipped with internal air
	temperature sensors that are triggered at 104°F (40°C) generating a
	minor alarm and at 131°F (55°C) generating a major alarm.
Temperature, nonoperating	–4° to 149°F (–20° to 65°C)
and storage
Thermal transition	0.5°C per minute (hot to cold)
	0.33°C per minute (cold to hot)
Humidity (RH), ambient	10% to 90%
(noncondensing) operating
Humidity (RH), ambient	5% to 95%
(noncondensing)
nonoperating and storage
Altitude, operating	Certified for operation: 0 to 6500 feet (0 to 2000 m)
	Designed and tested for operation: –200 to 10,000 feet (–60 to 3000 m)

Catalyst 6500 Series Ethernet Modules Installation Guide

	OL-6265-04	1-17