Cisco Systems 6500 manual Distributed forwarding Not supported Support

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-24 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features (continued)

Feature	Description
QoS	• Number of egress queues: 4
	• Number of ingress queues: 2
	• Number of thresholds per egress queue: 1
	• Number of thresholds per ingress queue: 0
Maximum frame size	Up to 9216 bytes (both modules)
Module oversubscription rate	N/A
Supervisor engine support	Supported on the following supervisor engines:
	•	Supervisor Engine 2
	•	Supervisor Engine 32
	• Supervisor Engine 32 PISA
	•	Supervisor Engine 720
	•	Supervisor Engine 720-10GE
Software support	• With Supervisor Engine 2—Not supported with Release 12.1E
	• With Supervisor Engine 32—12.2(18)SXF3
	• With Supervisor Engine 32 PISA—12.2(18)ZY
	• With Supervisor Engine 720—12.2(18)SXF3
	• With Supervisor Engine 720-10GE—12.2(33)SXH
	•	Catalyst OS Release—8.2.1
Queues per port	Both modules:
	•	Tx—1p3q1t
	•	Rx—1p1q0t
Chassis/slot restrictions	No chassis or slot restrictions; the module can occupy any slot in any
	Catalyst 6500 or Catalyst 6500-E chassis.
Bus connection	32-Gbps shared bus (both modules)
Module upgrades available
PoE support	WS-X6196-RJ-21—Field upgradeable to both Cisco prestandard and
	IEEE 802.3af with the WS-F6K-FE48X2-AF= PoE daughter card.
	Note With the PoE daughter card installed, the WS-X6196-RJ-21
		module can support 96 Class 2 (7 W) devices or 62 Class 3
		(15.4 W) devices per module.
	WS-X6196-21AF—Shipped with a WS-F6K-FE48X2-AF PoE
	daughter card installed.
	See the Cisco Catalyst 6500 Series Power over Ethernet Daughter
	Cards Field-Upgrade Installation Note for field upgrade procedures.
	See Appendix A for further information on the PoE daughter cards.

Distributed forwarding		Not supported.
support
	Catalyst 6500 Series Ethernet Modules Installation Guide
2-38			OL-6265-04