Cisco Systems 6500 manual FAN-MOD-4HS-300 CFM

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6504-E Switch

Table 1-6 Catalyst 6504-E Switch Specifications

Item	Specification
Environmental
Temperature, operating	Certified for operation: 32° to 104°F (0° to 40°C)
	Designed and tested for operation: 32° to 130°F (0° to 55°C)
	Note The Catalyst 6500 series switches are equipped with internal air
	temperature sensors that are triggered at 104°F (40°C) generating a
	minor alarm and at 131°F (55°C) generating a major alarm.
Temperature, nonoperating	–4° to 149°F (–20° to 65°C)
and storage
Thermal transition	0.5°C per minute (hot to cold)
	0.33°C per minute (cold to hot)
Humidity (RH), ambient	10% to 85%
(noncondensing) operating
Humidity (RH), ambient	5% to 95%
(noncondensing)
nonoperating and storage
Altitude, operating	Certified for operation: 0 to 6500 feet (0 to 2000 m)
	Designed and tested for operation: –200 to 10,000 feet (–60 to 3000 m)
Physical Characteristics
Dimensions (H x W x D)	• 8.7 x 17.5 x 21.6 in. (22.09 x 44.45 x 54.86 cm).
	• Chassis requires 5 RU.
	• Chassis can be mounted in equipment racks that meet ANSI/EIA 310-D
	and ETS 300-119 standards.
Weight	• Chassis only: 27 lb (12.25 kg).
	• Chassis fully configured with 2 supervisor engines, 2 modules, and
	2 AC-input power supplies: 97 lb (43.99 kg).
Airflow	FAN-MOD-4HS—300 CFM
	Note To maintain proper air circulation through the Catalyst switch
	chassis, we recommend that you maintain a minimum 6-inch (15 cm)
	separation between a wall and the chassis air intake or a wall and the
	chassis air exhaust. You should also allow a minimum separation of
	12 inches (30.5 cm) between the hot air exhaust on one chassis and
	the air intake on another chassis. Failure to maintain adequate air
	space can cause the chassis to overheat and the system to fail. On
	Catalyst chassis in which the airflow is from front to back, the
	chassis may be placed side-by-side.

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 1-13