Chapter 2 Ethernet Switching Modules
Table
Feature | Description | |
|
|
|
Queues per port | • | |
| • | |
|
| |
Chassis/slot restrictions | • Not supported in the Catalyst 6503 chassis. | |
| • Supported only in slots | |
|
| module does not power up if it is installed in slots |
| • | When the |
|
| series chassis or a Catalyst |
|
| is NEBS 3 compliant (chassis supports operating temperatures up |
|
| to 55°C). |
| • When the | |
|
| |
|
| 2500 W or larger power supply, the configuration is not NEBS 3 |
|
| compliant (chassis supports operating temperatures up to 40°C |
|
| only). |
| • Support for the Catalyst | |
|
| |
|
|
|
Fabric connection | • | Dual |
|
| – Fabric channel 1: Ports 2, 3, 6, 8 |
|
| – Fabric channel 2: Ports 1, 4, 5, 7 |
|
| |
Fabric channel speed | 20 Gb/sec | |
|
|
|
Module upgrades available |
|
|
PoE support | Not supported. | |
Distributed forwarding | • | |
support |
| daughter card. |
| • | |
|
| daughter card. |
|
| |
Pluggable transceivers | X2 transceivers are supported. Not all types of X2 transceivers may be | |
support | supported. Refer to your software release notes to determine which X2 | |
| transceivers are currently supported. See the | |
| section on page | |
| X2 transceivers. | |
| Note The | |
|
| prior to the release of the |
|
| Release 12.2(18)SXF5. The unsupported X2 transceivers are |
|
| labeled with a number that ends with |
|
| not apply to the |
|
|
|
Catalyst 6500 Series Ethernet Modules Installation Guide
|
| ||
|
|