Cisco Systems 6500 manual Feature Descriptions

Models: 6500

1 262
Download 262 pages 31.67 Kb
Page 32
Image 32

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6506 Switch

Table 1-7 Catalyst 6506 Switch Features (continued)

Feature

Descriptions

 

 

Supervisor engines

Supports Supervisor Engine 2, Supervisor Engine 32, Supervisor

 

Engine 32 PISA, Supervisor Engine 720, and Supervisor

 

Engine 720-10GE.

 

Supervisor Engine 2 is installed in slot 1 or slot 2.

 

Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor

 

Engine 720, and Supervisor Engine 720-10GE are installed in slot 5

 

or slot 6.

 

Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor

 

Engine 720, and Supervisor Engine 720-10GE all require the

 

high-speed fan tray (WS-C6K-6SLOT-FAN2) be installed in the

 

chassis. You must also install a 2500 W or higher capacity power

 

supply in the chassis to power the high-speed fan tray.

 

Note The 2500 W power supply, when supporting the high-speed fan tray,

 

can be powered from either 120 VAC or 220 VAC.

 

Supervisor Engine 720 and Supervisor Engine 720-10GE have

 

built-in switching fabric. Switch Fabric Modules (WS-C6500-SFM

 

and WS-X6500-SFM2) are not supported by Supervisor Engine 720

 

and Supervisor Engine 720-10GE and cannot be installed in the

 

same chassis.

 

Supervisor Engine 32 and Supervisor Engine 32 PISA do not

 

support the Switch Fabric Modules (WS-C6500-SFM and

 

WS-X6500-SFM2).

 

The uplink ports are fully functional on the redundant supervisor engine

 

in standby mode.

 

Note In systems with redundant supervisor engines, both supervisor

 

engines must be the same model and have the same daughter card

 

configurations. Each supervisor engine must have the resources to

 

run the switch on its own, which means all supervisor engine

 

resources are duplicated. Identical supervisor engine memory

 

configurations are recommended, but are not required as long as the

 

supervisor engine with the smaller memory configuration is

 

sufficient to run the configured features of the switch. Additionally,

 

each supervisor engine must have its own flash device and console

 

port connections.

 

 

Catalyst 6500 Series Ethernet Modules Installation Guide

1-16

OL-6265-04

 

 

Page 32
Image 32
Cisco Systems 6500 manual Feature Descriptions