Cisco Systems 6500 manual WS-X6348-RJ21V Features

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-26 WS-X6348-RJ21V Features (continued)

Feature	Description
Queues per port	•	Tx—2q2t
	•	Rx—1q4t
Chassis/slot restrictions	No chassis or slot restrictions; the module can occupy any slot in any
	Catalyst 6500 or Catalyst 6500-E chassis.
Bus connection	32-Gbps shared bus
Module upgrades available
PoE support	Cisco prestandard only. The WS-F6K-VPWR= PoE daughter card is
	factory installed on the module. No PoE field upgrades are available.
Distributed forwarding	Not supported.
support
Pluggable transceivers	Not supported.
support
TDR support	Not supported.
Module front panel LEDs	STATUS
	• Green—All diagnostics pass; the module is operational.
	• Orange—The module is booting or running diagnostics.
		An overtemperature condition has occurred. (A minor temperature
		threshold has been exceeded during environmental monitoring.)
	• Red—The module is resetting. The switch has just been powered
		on or the module has been hot inserted during the normal
		initialization sequence.
		An overtemperature condition has occurred. (A major temperature
		threshold has been exceeded during environmental monitoring.)
		If the module fails to download code and configuration information
		successfully during the initial reset, the LED stays red; the module
		does not come online.
	LINK
	• Green—The port is active (the link is connected and operational).
	• Orange—The module or port is disabled through the CLI command
		or the module is initializing.
	• Flashing orange—The port is faulty and has been disabled.
	• Off—The port is not active or the link is not connected.
	PHONE
	• Green—The PoE daughter card is installed and detected.
	• Off—The PoE daughter card is not detected or is not installed.

Catalyst 6500 Series Ethernet Modules Installation Guide

2-42 OL-6265-04