Cisco Systems 6500 manual Operate

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6506-E Switch

Table 1-9 Catalyst 6506-E Switch Features

Feature	Descriptions
Chassis	Six horizontal slots. Slots are numbered from 1 (top) to 6 (bottom).
Power supplies	• Supports one or two power supplies. The following power supplies are
	supported:
	– WS-CAC-2500W (2500 W AC-input power supply)
	– WS-CDC-2500W (2500 W DC-input power supply)
	– WS-CAC-3000W (3000 W AC-input power supply)
	– WS-CAC-4000W-US (4000 W AC-input power supply)
	– WS-CAC-4000W-INT (4000 W AC-input power supply)
	– PWR-4000-DC (4000 W DC-input power supply)
	– WS-CAC-6000W (6000 W AC-input power supply)
	– WS-CAC-8700W-E (8700 W AC-input power supply)
	Note For information and specifications for each of the supported power
	supplies, refer to Appendix A, “Power Supply Specifications,” in the
	Catalyst 6500 Series Switches Installation Guide.
	• Installed power supplies can be of different wattage ratings. Installed
	power supplies can also be both AC-input, both DC-input, or one
	AC-input and one DC-input. Power supplies can be configured in either
	redundant or nonredundant mode.
	• All Catalyst 6500 series AC-input power supplies require single-phase
	source AC. Source AC can be out of phase between multiple power
	supplies or multiple AC-power plugs on the same power supply because
	all AC power supply inputs are isolated.
	• The Supervisor Engine 2T requires a 3000 W or greater power supply to
	operate.
	• Single power supplies are installed in the left power supply bay. The
	second power supply is installed in the right power supply bay.

Catalyst 6500 Series Ethernet Modules Installation Guide

1-20 OL-6265-04