Verify that all Link LEDs are functioning

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-31	WS-X6516-GE-TX Ethernet Module Features (continued)

Feature		Description

Chassis/slot restrictions		No chassis or slot restrictions; the module can occupy any slot in any
		Catalyst 6500 or Catalyst 6500-E chassis.

Bus connection		32-Gbps shared bus

Module upgrades available
PoE support		Not supported.
Distributed forwarding		Not supported.
support

Pluggable transceivers		Not supported.
support

TDR support		Not supported.

Module front panel LEDs		STATUS
		• Green—All diagnostics pass; the module is operational.
		• Orange—The module is booting or running diagnostics.
		An overtemperature condition has occurred. (A minor temperature
		threshold has been exceeded during environmental monitoring.)
		• Red—The module is resetting. The switch has just been powered
		on or the module has been hot inserted during the normal
		initialization sequence.
		An overtemperature condition has occurred. (A major temperature
		threshold has been exceeded during environmental monitoring.)
		If the module fails to download code and configuration information
		successfully during the initial reset, the LED stays red; the module
		does not come online.
		LINK
		• Green—The port is active (the link is connected and operational).
		• Orange—The module or port is disabled through the CLI command
		or the module is initializing1.
		• Flashing orange—The port is faulty and has been disabled.
		• Off—The port is not active or the link is not connected.
		PHONE

•Green—The PoE daughter card is installed and detected.

•Off—The PoE daughter card is not detected or is not installed.

1.Verify that all LINK LEDs are functioning.

Catalyst 6500 Series Ethernet Modules Installation Guide

2-48	OL-6265-04