Cisco Systems 6500 manual 104

Chapter 2 Ethernet Switching Modules

10-Gigabit Ethernet Modules

Table 2-58 WS-X6716-10GE and WS-X6816-10G-2T/-2TXL Ethernet Module Features (continued)

Feature	Description
Chassis/slot restrictions	• Not supported in the Catalyst 6503 chassis.
	• Supported only in slots 9–13 in the Catalyst 6513 chassis and does
	not power up in slots 1–8.
	• When the WS-X6716-10G module is installed in a Catalyst 6500
	E-series chassis or a Catalyst 6509-NEB-A chassis, the
	configuration is NEBS 3 compliant (chassis supports operating
	temperatures up to 55°C).
	• When the WS-X6716-10G module is installed in a Catalyst 6500
	non-E series chassis that is equipped with a fan tray 2 and a
	2500 W or larger power supply, the configuration is not NEBS 3
	compliant (chassis supports operating temperatures up to 40°C
	only).
	• Support in the Catalyst 6509-NEB-A chassis requires two
	FAN-MOD-09 fan trays.
	• WS-X6816-10G-2T/-2TXL is supported only in Catalyst 6500
	E-series switches equipped with a Supervisor Engine 2T.
	• Requires that modules be installed in adjacent slots or, if either
	adjacent slot is unused, you must install a switching-module filler
	plate (Cisco part numbers WS-X6K-SLOT-CVR-E or
	SLOTBLANK-09) rather than a blank slot cover
	(WS-X6K-SLOT-CVR) to maintain an adequate air flow through
	the chassis.
Fabric connection	• Dual switch-fabric connections:
	– Fabric channel 1: Ports 1–8
	– Fabric channel 2: Ports 9–16
Fabric channel speed	20 Gb/sec (dual channel, 40 Gb/sec total)

	Catalyst 6500 Series Ethernet Modules Installation Guide
2-104	OL-6265-04