Cisco Systems 6500 manual WS-X6148-FE-SFP Physical and Environmental Specifications

Chapter 2 Ethernet Switching Modules

10 and 10/100 Fiber-Based Ethernet Modules

Table 2-3	WS-X6148-FE-SFP Features (continued)
Feature		Description
Pluggable transceivers		The module supports 100BASE-X Fast Ethernet SFP transceivers.
support		Refer to your software release notes to determine which Fast Ethernet
		SFP transceivers are supported. See the “100-MB Transceivers” section
		on page B-1in Appendix B for additional information on the Fast
		Ethernet SFP transceivers.
Digital Optical Monitoring		Not supported
(DOM) support
Module front panel LEDs		STATUS
		• Green—All diagnostics pass; the module is operational.
		• Orange—The module is booting or running diagnostics; an
			overtemperature condition has occurred.
		LINK
		• Green—The port is active (the link is connected and operational).
		• Flashing orange—The port failed diagnostics and is disabled.
		• Orange—The port is disabled.
		• Red—The module is resetting; an overtemperature condition has
			occurred.
		Note If the module fails to download code and configuration
			information successfully during the initial reset, the LED stays
			red; the module does not come online.
		• Off—The port is not active or the link is not connected.
Table 2-4	WS-X6148-FE-SFP Physical and Environmental Specifications
Item		Specification
Dimensions (H x W x D)		1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in
		the chassis.
Weight		6.6 lb (3 kg)
Power and heat numbers		•	Module current—2.3 A
		•	Module power—96.60 W
		•	AC-input power—120.75 W
		• AC heat dissipation—412.36 BTU/hour
		•	DC-input power—129.84 W
		• DC heat dissipation—443.40 BTU/hour

Catalyst 6500 Series Ethernet Modules Installation Guide

2-6 OL-6265-04