Cisco Systems 6500 manual Distributed forwarding Not supported Support

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-16 WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules Features (continued)

Feature	Description
Software support	• With Supervisor Engine 2—12.1(12c)E1
	• With Supervisor Engine 32—12.2(18)SXF
	• With Supervisor Engine 32 PISA—12.2(18)ZY
	• With Supervisor Engine 720—12.2(18)SXF (6148A)
	• With Supervisor Engine 720 except with WS-F6K-48-AF PoE
		daughter card—12.2(14)SX (6148)
	• With Supervisor Engine 720 and WS-F6K-48-AF PoE daughter
		card—12.2(17d)SXB (6148)
	• With Supervisor Engine 720-10GE—12.2(33)SXH
	• With Supervisor Engine 2T—12.2(50)SY
	•	Catalyst OS (6148A)—8.4(1)
	• Catalyst OS (6148)—6.4(11) (for software release 6.x); 7.6(9) (for
		software release 7.x)
Queues per port	• WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V
		– Tx—1p2q2t per 8 ports
		–	Rx—1p2t per port
	•	WS-X6148A-RJ-45 and WS-X6148A-45AF
		–	Tx—1p3q8t
		–	Rx—1q2t
Chassis/slot restrictions	No chassis or slot restrictions; the module can occupy any slot in any
	Catalyst 6500 or Catalyst 6500-E chassis (all variants).
Bus connection	Single connection into the 32-Gbps shared bus (all variants)
Module upgrades available
PoE support	• WS-X6148-RJ-45—Field upgradeable to the Cisco prestandard
		only with the WS-F6K-VPWR-GE= daughter card or both the
		Cisco prestandard and the IEEE 802.3af standard by installing the
		WS-F6K-GE48-AF= daughter card.
	• WS-X6148A-RJ-45—Field upgradeable to the Cisco prestandard
		and the IEEE 802.3af standard by installing the
		WS-F6K-GE48-AF= daughter card.
	See the Cisco Catalyst 6500 Series Power over Ethernet Daughter
	Cards Field-Upgrade Installation Note for field upgrade procedures.
	See Appendix A for further information on the PoE daughter cards.
Distributed forwarding	Not supported.
support

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 2-25