Cisco Systems manual Catalyst 6500 Series Ethernet Modules Installation Guide

Chapter 2 Ethernet Switching Modules

1-Gigabit Ethernet Modules

Table 2-48 WS-X6724-SFP and WS-X6824-SFP-2T/-2TXL Ethernet Module Features (continued)

Feature	Description
Supervisor engine support	• WS-X6724-SFP
	–	Supervisor Engine 720
	–	Supervisor Engine 720-10GE
	– Supervisor Engine 2T (The WS-X6724-SFP must be equipped
		with either a CFC, DFC4 or DFC4XL daughter card)
	• WS-X6824-SFP-2T/-2TXL
	–	Supervisor Engine 2T-10GE
	Note WS-X6724-SFP modules that are equipped with a CFC
		daughter card are supported on the Supervisor Engine 2T.
		WS-X6724-SFP modules that are upgraded with DFC4-A or
		DFC4-AXL daughter cards are supported only on the
		Supervisor Engine 2T-10GE
Software support	• WS-X6724-SFP
	– With Supervisor Engine 720—12.2(17a)SX
	– With Supervisor Engine 720 and DFC3C or
		DFC3CXL—12.2(33)SXH
	– With Supervisor Engine 720-10GE—12.2(33)SXH
	– With Supervisor Engine 2T (module equipped with either CFC
		or DFC4—12.2(50)SY
	• WS-X6824-SFP-2T/-2TXL
	– With Supervisor Engine 2T-10GE—12.2(50)SY
Queues per port	• With CFC daughter card:
	–	Tx—1p3q8t
	–	Rx—1q8t
	• With DFC daughter card:
	–	Tx—1p3q8t
	–	Rx—2q8t
Chassis/slot restrictions	• The WS-X6724-SFP module is not supported in the Catalyst 6503
	chassis.
	• The WS-X6724-SFP when equipped with either a CFC, or DFC4
	daughter card is supported by the Supervisor Engine 2T.
	• The WS-X6824-SFP-2T/-2TXL is support only in Catalyst 6500
	E-series chassis equipped with Supervisor Engine 2T.
	• Requires that modules be installed in adjacent slots or, if either
	adjacent slot is unused, you must install a switching-module filler
	plate (Cisco part numbers WS-X6K-SLOT-CVR-E or
	SLOTBLANK-09) rather than a blank slot cover
	(WS-X6K-SLOT-CVR) to maintain an adequate air flow through
	the chassis.
Fabric connection	Single fabric channel.
		Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-04			2-79