Cisco Systems 6500 manual Status

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-24 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features (continued)

Feature	Description
Pluggable transceivers	Not supported.
support
TDR support	Not supported.
Module front panel LEDs	STATUS
	• Green—All diagnostics pass; the module is operational.
	• Orange—The module is booting or running diagnostics.
	An overtemperature condition has occurred. (A minor temperature
	threshold has been exceeded during environmental monitoring.)
	• Red—The module is resetting. The switch has just been powered
	on or the module has been hot inserted during the normal
	initialization sequence.
	An overtemperature condition has occurred. (A major temperature
	threshold has been exceeded during environmental monitoring.)
	If the module fails to download code and configuration information
	successfully during the initial reset, the LED stays red; the module
	does not come online.
	LINK
	• Green—The port is active (the link is connected and operational).
	• Orange—The module or port is disabled through the CLI command
	or the module is initializing.
	• Flashing orange—The port is faulty and has been disabled.
	• Off—The port is not active or the link is not connected.
	PHONE
	• Green—The PoE daughter card is installed and detected.
	• Off—The PoE daughter card is not detected or is not installed.

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 2-39