Cisco Systems 6500 manual Procedures

Models: 6500

1 262
Download 262 pages 31.67 Kb
Page 125
Image 125

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-36 WS-X6548-RJ-21 Ethernet Module Features (continued)

Feature

Description

Queues per port

Tx—1p3q1t

 

Rx—1p1q0t

 

 

Chassis/slot restrictions

No chassis or slot restrictions; the module can occupy any slot in any

 

Catalyst 6500 or Catalyst 6500-E chassis.

 

 

Bus connection

32-Gbps shared bus

 

 

 

Module upgrades available

 

 

PoE support

Not available.

Distributed forwarding

Can be field-upgraded with either the WS-F6K-DFC,

support

WS-F6K-DFC3B, or WS-F6K-DFC3BXL daughter cards.

 

See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL

 

Installation Note for additional information and field upgrade

 

procedures.

 

See Appendix A for additional information on the DFC daughter cards.

 

 

Pluggable transceivers

Not supported.

support

 

 

 

 

TDR support

Not supported.

 

 

Module front panel LEDs

STATUS

 

Green—All diagnostics pass; the module is operational.

 

Orange—The module is booting or running diagnostics.

 

 

An overtemperature condition has occurred. (A minor temperature

 

 

threshold has been exceeded during environmental monitoring.)

 

Red—The module is resetting. The switch has just been powered

 

 

on or the module has been hot inserted during the normal

 

 

initialization sequence.

 

 

An overtemperature condition has occurred. (A major temperature

 

 

threshold has been exceeded during environmental monitoring.)

 

 

If the module fails to download code and configuration information

 

 

successfully during the initial reset, the LED stays red; the module

 

 

does not come online.

 

LINK

 

Green—The port is active (the link is connected and operational).

 

Orange—The module or port is disabled through the CLI command

 

 

or the module is initializing1.

 

Flashing orange—The port is faulty and has been disabled.

 

Off—The port is not active or the link is not connected.

 

PHONE

Green—The PoE daughter card is installed and detected.

Off—The PoE daughter card is not detected or is not installed.

1.Verify that all LINK LEDs are functioning.

Catalyst 6500 Series Ethernet Modules Installation Guide

 

OL-6265-04

2-55

 

 

 

Page 125
Image 125
Cisco Systems 6500 manual Procedures