Cisco Systems 6500 manual Nonredundant mode

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6509-NEB-A Switch

Table 1-17 Catalyst 6509-NEB-A Switch Features

Feature	Description
Chassis	Nine vertical slots. Slots are numbered from 1 (right) to 9 (left).
Power supplies	• Supports one or two power supplies. The following power supplies are
	supported:
	– WS-CAC-2500W (2500 W AC-input power supply)
	– WS-CDC-2500W (2500 W DC-input power supply)
	– WS-CAC-3000W (3000 W AC-input power supply)
	– WS-CAC-4000W-US (4000 W AC-input power supply)
	– WS-CAC-4000W-INT (4000 W AC-input power supply)
	– PWR-4000-DC (4000 W DC-input power supply)
	– WS-CAC-6000W (6000 W AC-input power supply)
	– WS-CAC-8700W-E (8700 W AC-input power supply)
	Note The 6000 W and the 8700 W AC-input power supplies are limited to
	4500 W maximum output when installed in the
	Catalyst 6509-NEB-A chassis.
	Note For information and specifications for each of the supported power
	supplies, refer to Appendix A, “Power Supply Specifications,” in the
	Catalyst 6500 Series Switches Installation Guide.
	• Installed power supplies can be of different ratings. Installed power
	supplies can also be both AC-input, both DC-input, or one AC-input and
	one DC-input. Power supplies can be configured in either redundant or
	nonredundant mode.
	• All Catalyst 6500 series AC-input power supplies require single-phase
	source AC. Source AC can be out of phase between multiple power
	supplies or multiple AC-power plugs on the same power supply because
	all AC power supply inputs are isolated.

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 1-37