Cisco Systems 6500 manual Catalyst 6509-V-E Switch Features

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6509-V-E Switch

Table 1-19 Catalyst 6509-V-E Switch Features

Feature

Chassis

‘

Description

Nine vertical slots. Slots are numbered from 1 (right) to 9 (left).

•Supports one or two power supplies. The following power supplies are supported:

–WS-CAC-2500W (2500 W AC-input power supply)

–WS-CDC-2500W (2500 W DC-input power supply)

–WS-CAC-3000W (3000 W AC-input power supply)

–WS-CAC-4000W-US (4000 W AC-input power supply)

–WS-CAC-4000W-INT (4000 W AC-input power supply)

–PWR-4000-DC (4000 W DC-input power supply)

–WS-CAC-6000W (6000 W AC-input power supply)

–WS-CAC-8700W-E (8700 W AC-input power supply)

Note For information and specifications for each of the supported power supplies, refer to Appendix A, “Power Supply Specifications,” in the Catalyst 6500 Series Switches Installation Guide.

•Installed power supplies can be of different ratings. Installed power supplies can also be both AC-input, both DC-input, or one AC-input and one DC-input. Power supplies can be configured in either redundant or nonredundant mode.

•Supervisor Engine 2T requires a 3000 W or greater power supply to operate.

•All Catalyst 6500 series AC-input power supplies require single-phase source AC. Source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated.

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 1-41