Cisco Systems 6500 manual Catalyst 6513-E Switch Features

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6513-E Switch

Table 1-23	Catalyst 6513-E Switch Features
Feature		Description
Chassis		Thirteen horizontal slots. Slots are numbered from (1) top to (13) bottom.
Power supplies		• Supports one or two power supplies. The following power supplies are
		supported:
		– WS-CDC-2500W (2500 W DC-input power supply)
		– WS-CAC-3000W (3000 W AC-input power supply)
		– WS-CAC-4000W-US (4000 W AC-input power supply)
		– WS-CAC-4000W-INT (4000 W AC-input power supply)
		– PWR-4000-DC (4000 W DC-input power supply)
		– WS-CAC-6000W (6000 W AC-input power supply)
		– PWR-6000-DC (6000 W DC-input power supply)
		– WS-CAC-8700W-E (8700 W AC-input power supply)
		Note For information and specifications for each of the supported power
		supplies, refer to Appendix A, “Power Supply Specifications,” in the
		Catalyst 6500 Series Switches Installation Guide.
		• Installed power supplies can be of different ratings. Installed power
		supplies can also be both AC-input, both DC-input, or one AC-input and
		one DC-input. Power supplies can be configured in either redundant or
		nonredundant mode.
		• Supervisor Engine 2T requires a 3000 W or greater power supply to
		operate.
		• All Catalyst 6500 series AC-input power supplies require single-phase
		source AC. Source AC can be out of phase between multiple power
		supplies or multiple AC-power plugs on the same power supply because
		all AC power supply inputs are isolated.

Catalyst 6500 Series Ethernet Modules Installation Guide

1-50 OL-6265-04