Industrial Ethernet Layer 2 Managed Switch – Web Management Manual
Default Setting
This function allows you to clean all settings and load the default value to Switch Management.
Current factory default values are：
Network Setting |
| |
IP Address |
| : 192.168.255.1 |
Gateway |
| : 192.168.0.1 |
Mask |
| : 255.255.0.0 |
Modbus Net ID | : 1 | |
Serial Port Setting |
| |
COM1 | :baudrate 115200,8bit,none patity check, 1 stopbit | |
COM2 | :baudrate 115200,8bit,none patity check, 1 stopbit | |
Redundant Setting |
| |
Ring Pair 1 | : disabled | |
Ring Pair 2 | : disabled | |
Protocol |
| : |
Ring Coupling | : Primary Switch | |
Recovery Time | : 300ms | |
Reboot Setting
When you finish the Network Setting, you have to reboot the Switch to activate the value, you can restart the system by clicking following reboot icon.
April 29, 2008 | 24 |
