ICP DAS USA MSM-508FCS, MSM-508FT user manual Serial Port, Mask：, MAC Address：, Modbus Net ID

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual

Mask：

The (subnet) MASK is used to determine the subnet of an IP address. Same as the IP address, a MASK contains four bytes (32 bits) and it is often expressed in the dotted-decimal notation.

The factory default value is labeled beside the Switch case.

MAC Address：

MAC Address is a hardware address. It’s a uniquely identifies the device of MAC layer network.

The standard (IEEE 802) format for human-readable is six groups of two hexadecimal digits, each digit separated by a dash or colon.

The factory default value is labeled on the Switch case.

Modbus Net ID

Specify the device ID for modbus protocol.

When the Network Setting is modified, you have to reboot the Switch to enable the new setting.

￿Serial Port

The Managed Switch supports two interfaces of serial communication. This function enables you to set up the transmission speed(baudrate),data bit(databit), parity check type (parity) and stop bit(stopbit).

April 29, 2008 6