Fluid Plate x, Screen 1

This screen displays the current dispense control mode used, the current pressure, and the current style being dispensed. It also displays the target dispense volume, the actual dispense volume, and the requested dis- pense volume.

From this screen users can adjust the bead scale and

enter maintenance mode. Press

and

to

change the bead scale. Press to enter mainte- nance mode.

Appendix A - Advanced Display Module (ADM)

The PCF system has two operating modes:

•Dispense mode – enables the module to begin dis- pensing when it receives a command from the auto- mation unit.

•Maintenance mode – enables the module to begin dispensing when the user presses the manual dis- pense button. Dispense parameters and duration depend on the selected control.

Dispensing continues for as long as the manual dis-

pense button is pressed.

Current Dispense

Inlet Pressure

Outlet Pres-

Control Mode

(non-heated systems)

sure

Command Voltage

 

 

(Displays only when

 

 

Command Cable or Gate-

 

 

way is selected as the

 

 

Command Value Source;

 

Flow Rate

see Fluid Plate Setup

 

Screens, page 105.)

 

(systems with flow

 

 

meters)

Current Command

Value

Active Dispense

Bead ScaleValves Quickly adjust pres-

sure/flowrate from this screen

Active Style

Progress Bar

Volumes

Associated Swirl

 

 

 

Dispensers

3A2098H

111

Page 110 Page 112
Page 111
Image 111
Graco 3A2098H Fluid Plate x, Screen, Flow Rate, Systems with flow, Meters, Current Command Value Active Dispense
Page 110 Page 112
Top Page Image Contents