Graco 3A2098H important safety instructions Setup Mode, Advanced Setup Screens

Setup Mode

Setup mode screens are divided into five sections: Sys- tem setup, Advanced setup, Gateway setup, Fluid Plate

setup, and Swirl setup. While in Run mode, press

to enter Setup mode. Press to navigate through the Setup mode screens.

If the setup screens are password protected, a pass-

word entry screen will appear after pressing . The

password is defined in the Advanced setup screen. If the password is set to 0000, the password is disabled.

Appendix A - Advanced Display Module (ADM)

Advanced Setup Screen 2

This screen enables users to set the units of measure for maintenance volume, maintenance mass, pressure, and flow rate.

Advanced Setup Screens

There are four Advanced setup screens, which enable users to set units, adjust values, set formats, define USB settings, and view software information for each

component. Press to scroll through the Advanced setup screens. Once in the desired Advanced

setup screen, pressto access the fields to make

changes. Press to exit edit mode.

NOTE: Users must be out of edit mode to scroll through the Advanced setup screens.

Advanced Setup Screen 3

This screen enables users to setup USB-related set- tings. The Disable USB Log Errors option disables recording events when the logs are at least 90% full.

Advanced Setup Screen 1

This screen enables users to set the language, date for- mat, current date and time, password, and number of minutes before the screen saver comes on. The time does not automatically update for daylight savings time.

Advanced Setup Screen 4

This screen displays the software part number and ver- sion for the ADM, USB configuration, Gateway module, and fluid plates.

3A2098H 101