Overview

Key Tokens

The ADM and FCM must each have a key token installed in order to operate. If the incorrect key token is installed, the module will not operate. The DGM does not require a key token.

ADMFCM

FIG. 11

NOTE: There is one FCM located on each fluid plate.

If a new ADM or FCM is installed, follow the instructions on page 77 to upgrade the software in the new module and to install the key token from the old module in the new module.

The following is a list of key token part numbers. If you lose your key token be sure to order the correct item to ensure proper system operation.

NOTE: The key tokens for the ADM and FCM look alike but only work in one module or the other. If the key tokens for the ADM and FCM become mixed, locate the part number on each token then refer to the following table to determine which module each token applies to.

Part

Description

 

 

16M100

FCM Key Token, 2 styles, Flow Meter

 

 

16M101

FCM Key Token, 2 styles, No Flow Meter

 

 

16M102

FCM Key Token, 16 styles, Flow Meter

 

 

16M103

FCM Key Token, 16 styles, No Flow Meter

 

 

16M104

FCM Key Token, 256 styles, Flow Meter

 

 

16M105

FCM Key Token, 256 styles, No Flow

 

Meter

 

 

16M217

ADM Key Token, Standard PCF

 

 

20

3A2098H

Page 20
Image 20
Graco 3A2098H important safety instructions Key Tokens, Admfcm