Replace Advanced Display Module Bracket

1.Prepare Control Center for Repair, page 87.

2.Remove the ADM (2); follow Replace Advanced Display Module. (Leave the CAN cable attached to the ADM.)

3.Remove the speed clips (25) and rivets (26) from the mounting bracket (21).

26

20

21

25

2

FIG. 64

4.Remove the mounting bracket from the front cover (20) and replace with a new bracket.

5.Secure the new bracket to the front cover with speed clips and rivets.

6.Reinstall the ADM.

Repair

Replace DIN Rail Assembly

1.Prepare Control Center for Repair, page 87.

2.Remove both screws (22) and washers (28) from the line voltage assembly cover (7). Remove the cover.

22 28

7

FIG. 65

3.Disconnect all wiring from the din rail module and fil- ter.

4.Remove the four screws (40) from the din rail and filter.

5.Disconnect wires from rocker/rotary switch. Take note of wire positions for easy connection in Step 7.

3A2098H

89

Page 89
Image 89
Graco 3A2098H important safety instructions Replace DIN Rail Assembly