Appendix A - Advanced Display Module (ADM)

Appendix A - Advanced Display Module (ADM)

Display Overview

The ADM display is divided into two main functions: Setup Mode and Run Mode.

Setup Mode Functions

The setup mode functions enable users to:

configure installed system components

set units, adjust values, set formats, and view software information for each component

set or change information regarding the Gate- way module

view information regarding the particular Gate- way module used

set controls and valve commands

set on and off delays for valves and the regula- tor

set k-factor, pressure, and flow rate variables

set offsets for inlet and outlet pressures

set error types

set variables for maintenance advisories

set up to 256 styles for models with a CGM and set up to 16 styles for models with a DGM

Display Details

Power Up Screen

The following screen appears when the ADM is pow- ered up. It remains on while the ADM runs through ini- tialization and establishes communication with other modules in the system.

Run Mode Functions

The run mode functions enable users to:

adjust the bead scale

perform manual dispensing

view a chronological list of system errors

view a chronological list of jobs stored/per- formed in the system

use a preventative maintenance schedule for the supply system, displacement pump, and air motor

Menu Bar

The menu bar appears at the top of each screen.

Date and Time

The date and time are always displayed in one of the fol- lowing formats. The time is always displayed as a 24-hour clock.

DD/MM/YY HH:MM

MM/DD/YY HH:MM

YY/MM/DD HH:MM

Arrows

The left and right arrows indicate screen navigation.

Screen Menu

The screen menu indicates the currently active screen, which is highlighted. It also indicates the associated screens that are available by scrolling left and right.

3A2098H

99

Page 99
Image 99
Graco 3A2098H important safety instructions Appendix a Advanced Display Module ADM, Display Overview, Display Details