Graco 3A2098H important safety instructions Run Mode, Fluid Plate Home Screen, Swirl Home Screen

Appendix A - Advanced Display Module (ADM)

Run Mode

Run mode screens are divided into six sections: home, fluid plates, swirls, events, errors, and jobs. While in

Setup mode press to enter Run mode. Press to navigate through the Run mode screens.

Fluid Plate Home Screen

NOTE: This screen only appears if more than one fluid plate is installed.

The Fluid Plate Home screen shows an overview for each of the individual fluid plates. The screen displays the following items:

•Open dispense valves

•Active style number and name

•Flow rate

•Inlet and outlet pressures

•Progress bar indicating actual amount dispensed (blue shaded portion), requested volume (upper and lower arrows) and target volume (end of white bar).

Swirl Home Screen

NOTE: This screen only appears if more than one Swirl Dispenser is installed.

To access the Swirl Home screen, press the down arrow key from the Fluid Plate Home screen. The Swirl Home screen shows an overview for each of the individual Swirl Dispensers. The screen displays the following items:

•Requested motor speed

•Actual motor speed

•Progress bar indicating requested and actual motor speed

110 3A2098H