Graco 3A2098H Install Fieldbus Connections, State Description Comments, Run, Stop

Appendix C - Communications Gateway Module (CGM) Connection Details

Appendix C - Communications Gateway Module (CGM) Connection Details

Install Fieldbus Connections

Connect cables to fieldbus per fieldbus standards.

PROFINET

	MS
NS	Link
	TI11814A

FIG. 69: PROFINET Fieldbus Connections

The Ethernet interface operates at 100Mbit, full duplex, as required by PROFINET. The Ethernet interface is auto-polarity sensing and auto-crossover capable.

Network Status (NS)

State	Description	Comments
Off	Offline	• No power
		• No connection with IO
		Controller
Green	On-line,	• Connection with IO Con-
	(RUN)	troller established
		• IO Controller with RUN
		state
Flashing	On-line,	• Connection with IO Con-
Green	(STOP)	troller established
		• IO Controller in STOP
		state

Module Status (MS)

State	Description	Comments
Off	Not initial-	No power or module in
	ized	“SETUP” or “NW_INIT” state
Green	Normal	Diagnostic event(s) present
	operation
Flashing	Initialized,	Used by engineering tools to
Green	diagnostic	identify node on network
	event(s)
	present
Red	Exception	Module in state “EXCEPTION”
	error
Red (1	Configura-	Expected Identification differs
flash)	tion error	from Real Identification
Red (2	IP Address	Set IP address via system
flashes)	not set	monitor or DNS server
Red (3	Station	Set Station Name via system
flashes)	Name not	monitor
	set
Red (4	Major Inter-	Cycle system power; replace
flashes)	nal Error	module

Link/Activity (Link)

State	Description
Off	No Link, no communication present
Green	Link established, no communication present
Green,	Link established, communication present
flashing

122 3A2098H