Graco 3A2098H important safety instructions Styles, To setup a style

Operation

Styles

The PCF system has the ability to handle up to 256 styles, depending on the selected option.

NOTE: The number of available styles depends on the fluid plate configuration. See Models on page 4. Style 0 is specified for purging only.

For each style, an independent target volume and toler- ance can be configured. This allows for job-related errors and logs to be evaluated for each style. The style is read at the beginning of a job and cannot be changed until the next job.

PCF reads in the styles via the Gateway interface. For detailed interface information, see Appendix B - Dis- crete Gateway Module (DGM) Connection Details on page 115, and Appendix C - Communications Gate- way Module (CGM) Connection Details on page 122, as applicable.

To setup a style:

1.Navigate to Fluid Plate x, screen 8.

2.Press to access the style setup fields.

FIG. 34

3.Enter the style number in the Style field.

4.Enter Style Name:

a.Press while in the Style Name field to dis- play the Keyboard screen.

FIG. 35

b.Use the arrow buttons on the ADM to scroll

through each letter. Press to enter a letter in the style name field. See Keyboard Screen,

page 109, for further details.

c.Press to accept the new value.

5.Enter the target volume in the Volume field, and the tolerance percentages in the Low and High Toler- ance fields.

6.Enter precharge mode and parameters. See Pre- charge Modes beginning on page 47.

7.Press to exit edit mode.

46 3A2098H