Graco 3A2098H important safety instructions Units Definitions, Unit s String Definition, Strxy

Appendix C - Communications Gateway Module (CGM) Connection Details

Units Definitions

Unit s String	Definition
Command Value Source Enu-	0	- Display, 1 - Command Cable, 2 - Gateway
meration
Dispense Control 1 Bitfield	Bit		Function	3	Valve 2 On	6	Error Reset
	0	............	Style Strobe	4	Valve 3 On	7	Remote Start/Purge
	1	............	Dispense Complete	5	Valve 4 On
	2	............	Valve 1 On
Dispense Control 2 Bitfield	Bit 14 - Error Reset, Bit 15 - Remote Start
Dispense Trigger Source Enu-	0	- Command Cable, 1 - Gateway, 2 - Combined, 3 - Command Cable 3x
meration
Error Type Enumeration 1	0	- None, 1 - Alarm, 2 - Deviation
Error Type Enumeration 2	1	- Alarm, 2 - Deviation
Fault Error Code	A 32-bit string in the format of 0xDDCCBBAA where 0xAA represents the most significant char-
	acter in the string and 0xDD represents the least significant character in the string.
Flow Meter Type Enumeration	1	- Volume, 2 - Mass
Fluid Plate Status 0 Bitfield	Bit		Function	3	Dispense In Process	7	Purge in Process/Remote
	0	............	Dispenser Ready	4	Dispensed Volume OK	Start in Process
	1	............	Dispense No Alarm	5	---
	2	............	Dispense No Error	6	Dispenser Purge Request
Fluid Plate Status Bitfield	Bit		Function	11	Alarm Active	24	Valve 3 Swirl Installed
	0-2		Operation Mode (see Valve	12	Deviation Active	25	Valve 4 Swirl Installed
	Mode Enumeration)			13	Advisory Active	26	Valve 1 Swirl Active
	3	............	Precharge Active	14	Dispensing Disabled	27	Valve 2 Swirl Active
	4	............	Valve 1 State	15	Fluid Plate Enabled	28	Valve 3 Swirl Active
	5	............	Valve 2 State	16	Flowmeter Enabled	29	Valve 4 Swirl Active
	6	............	Valve 3 State	17	Inlet Sensor Enabled	30	Fault Reset
	7	............	Valve 4 State	18	Heated Plate	31	Remote Start/Purge
	8	............	Ready to Dispense	19	Integrator Enabled
	9	............	In Job Cycle	22	Valve 1 Swirl Installed
	10		Job Cycle Complete	23	Valve 2 Swirl Installed
Job End Mode Enumeration	0	- Timer, 1 - Gateway
Maintenance Units Enumeration	0	- Volume, 1 - Mass, 2 - Time
Mass Units Enumeration	0	- lb, 1 - kg
Precharge Settings Type	A 32 bit value in the format of 0xDDCCBBA:
	0xA........Precharge mode enumeration: 0 - Display, 1 - Gateway, 2 - Valve 1
	0xBBB...		Precharge valve opening duration (ms)
	0xCC		Precharge scale - valve closed (%)
	0xDD		Precharge scale - valve opening (%)
Pressure Units Enumeration	0	- psi, 1 - bar, 2 - MPa
Rate Units Enumeration	0	- x/min, 1 - x/sec
sint32	A 32 bit positive or negative value
Speed Source Enumeration	0	- Display, 1 - Gateway
STR_X_Y	A 32 bit value where X signifies which character in the string that the most significant byte rep-
	resents and Y signifies which character in the string that the least significant byte represents.
Swirl Control Enumeration	0	- Swirl Enable
Swirl Enumeration	0	- None, 1 - Swirl 1, 2 - Swirl 2, 3 - Swirl 3, 4 - Swirl 4
Swirl Status Bitfield 1	0	- Swirl Active, 1 - Swirl Ready, 2 - Swirl Enabled
Tolerances Type	A 32 bit value in the format of 0x0000BBAA where 0xAA represents the low tolerance (%) and
	0xBB represents the high tolerance (%). A value of 0 means that tolerance is disabled.
Valve Mode Enumeration	0	- Pressure, 1 - Bead, 2 - Shot, 3 - Full Open
uint12	A 12 bit positive value
uint32	A 32 bit positive value
Version	A 32 bit value in the format of 0x00CCBBAA where 0xAA represents the major version, 0xBB
	represents the minor version and 0xCC represents the build version.
Volume Units Enumeration	0	- gal(US), 1 - gal(UK), 2 - Liters

3A2098H 137