Graco 3A2098H important safety instructions Soft Keys, Navigation within Screens

Appendix A - Advanced Display Module (ADM)

System Mode

There are five modes: Active, Job in Cycle, Display Con- trol, Swirl Setup, and System Off. The current system mode is displayed at the left of the menu bar.

Alarm/Deviation

If there is an active system error, one of the following icons is displayed in the middle of the menu bar. There are four possibilities:

Icon	Function	Description
	No information or
No Icon	no error has	---
	occurred
	Advisory	Informational
		Important but will
	Deviation	not shut down the
		affected fluid
		plate
		Very important
		and will immedi-
	Alarm	ately shut down
		the affected fluid
		plate

Status

The current system status is displayed at the right of the menu bar.

Soft Keys

Icons next to the soft keys indicate which mode or action is associated with each soft key. Soft keys that do not have an icon next to them are not active in the current screen.

NOTICE

To prevent damage to the soft key buttons, do not press the buttons with sharp objects such as pens, plastic cards, or fingernails.

Jump In/Jump Out

In screens that have editable fields, pressto access the fields and make changes. When changes are com-

plete press again to exit edit mode.

Navigation within Screens

Press to open drop-down menus on Setup

screens. Also, press to enter changes or make a selection.

Press to navigate to new screens and to nav- igate left and right within a screen.

Press to navigate to new screens and to navi-

gate up and down within a screen. Also press

to move between fields within a drop-down menu, and to increment or decrement numbers within a field.

100 3A2098H