USB Data

System Configuration Settings File

The system configuration settings file name is SETTINGS.TXT and is stored in the DOWNLOAD folder.

A system configuration settings file automatically down- loads each time a USB flash drive is inserted. Use this file to back up system settings for future recovery or to easily replicate settings across multiple PCF systems.

Refer to the Upload Procedure, page 61, for instruc- tions on how to use this file.

It is recommended to retrieve the SETTINGS.TXT file after all system settings are set as desired. Store the file for future use as a backup in case the settings are changed and need to be quickly changed back to the desired setup.

NOTE: System settings may not be compatible between different versions of the PCF software.

NOTE: Do not modify the contents of this file.

Custom Language File

The custom language file name is DISPTEXT.TXT and is stored in the DOWNLOAD folder.

A custom language file automatically downloads each time a USB flash drive is inserted. If desired, use this file to create a user-defined set of custom language strings to be displayed within the ADM.

The PCF system is able to display the following Unicode characters. For characters outside of this set, the sys- tem will display the Unicode replacement character, which appears as a white question mark inside of a black diamond.

U+0020 - U+007E (Basic Latin)

U+00A1 - U+00FF (Latin-1 Supplement)

U+0100 - U+017F (Latin Extended-A)

U+0386 - U+03CE (Greek)

U+0400 - U+045F (Cyrillic)

Create Custom Language Strings

The custom language file is a tab-delimited text file that contains two columns. The first column consists of a list of strings in the language selected at the time of down- load. The second column can be used to enter the cus- tom language strings. If a custom language was previously installed, this column contains the custom strings. Otherwise the second column is blank.

Modify the second column of the custom language file as needed and then follow the Upload Procedure, page 61, to install the file.

The format of the custom language file is critical. The following rules must be followed in order for the installa- tion process to succeed.

The file name must be DISPTEXT.TXT.

The file format must be a tab-delimited text file using Unicode (UTF-16) character representa- tion.

The file must contain only two columns, with columns separated by a single tab character.

Do not add or remove rows to the file.

Do not change the order of the rows.

Define a custom string for each row in the sec- ond column.

60

3A2098H

Page 60
Image 60
Graco 3A2098H System Configuration Settings File, Custom Language File, Create Custom Language Strings