AT&T AT&T manual Options Current Default, EXit Change options View options, Hangup

<Options>:

If the Command Mode menu item <Options> is chosen, the terminal displays the data port’s administered options. System default values for each option are also shown. The display shown below is similar to what is actually presented on the screen. (See Tables 2-Fand 2-G)for additional information on options. )

OPTIONS			CURRENT	DEFAULT
Speed	(highest)		9600	19200 (Auto)
Parity			Even	Even
Mismatch			Yes	No
Local	Echo		Yes	Yes
Answer		Text	Yes	Yes
Connect		Indication	Yes	Yes
Recall	Sequence		Br-Br	Br-Br
<eXit>		<Change options>		<View options>

In V1 systems, only the System Administrator can change options. In V2 systems, the System Administrator can still perform the task or can authorize data terminal users to change their own options. Selection of <Change options> from the sub-menu shown above allows the data terminal user to change the values in the CURRENT column. Refer to the “User Changeable Options” subsection for complete information on this feature.

<Hangup>:

The <Hangup> option can be used to terminate a connection to the data port. For V2 systems only, this option is needed for AT&T STARLAN NETWORK endpoints to disconnect from a STARLAN Interface CP through Command Mode. Accessing <Hangup> provides the user with these options:

● <eXit>— Do not hang up. Return to the top level of Command Mode.

● <All>—Hang up (disconnected)

2-96