AT&T AT&T manual ATL Adapters, Administrable Parameters, Individually Administrable default, 221

ATL Adapters

The ATL adapter (KS23475) is a connection block that provides: 48V dc power from T1 (via modular cords C4 and Cl) to the ATL phone, data connections from the STARLAN workstation, and phone connections from the ATL phone (via modular cord Cl) over a shared common cable (C3) to System 25. The phone and data connections are on separate wire pairs that are split-out at the SIP “Y” adapter (Al). Phone wiring is cabled to the ATL Line CP (ZTN79) by octopus cable C2, and data wiring is cabled to the NEU by modular cord Cl.

Administrable Parameters

The STARLAN CP is administered as a type of data port. Some items administered on one port are automatically administered for all four ports on the CP, others are individually administrable.

Individually Administrable (default)

●DDC of port

●DDC to hunt to next (none)

●Display ID

Common Administration (default)

● CO trunk pool dial restriction (no)

● Other trunk pool dial restriction (no)

● Outward restriction (no)

● Toll Restriction Class (none)

●ARS FRL (3)

●Restrict Third-Party Call Setup feature (yes)

Hardware Requirements

Requires a STARLAN INTERFACE CP. Each CP provides four interface ports between the System 25 and the STARLAN NETWORK.

2-221