Traffic load, defined as the sum of static and dynamic loads, is a function of the number of features that are executed, the frequency with which they are executed, the system configuration, a n d t h e i n s t a n t a n e o u s ( p e a k ) c a l l p r o c e s s i n g l o a d . T h e c o n f i g u r a t i o n contribution to load is known as dynamic load. The static load consists of maintenance and audit routines.
Software Partitioning
System 25 software is comprised of various modules, each supporting a particular process. Typical modules (referred to as tasks) include the following:
●Administration
●Station Call Processing
● Station Message Detail Recording (SMDR) Call Record Processing
● Trunk Call Processing
● Dial Plan Manager
●Event Timer
● Save/Restore | (Administration | function) |
●Maintenance and Audit Functions.
As shown on Figure
Memory Circuit Pack
Administration: Provides for administration of station and system features. This software also supports maintenance procedures related to error checking and diagnosing trouble.
Feature Code Modules: Includes the software that receives and sends data to/from the Operating System, as well as control of all voice and data features supported by the system. Station Call Processing includes the processing of messages and data associated with voice terminal
Call Processor Circuit Pack
System RAM: Provides for the storage of the following:
● Variables for the various software tasks
● System | translations |
●Error Records
●Feature Code Data
●Stack.