Line Selection (Prime Line Preference): When Prime Line Preference is

assigned to a DSS button, the button must be pressed to invoke the busy-to-idle reminder, even though its red I-Use LED is lighted.

Personal Dial Code (PDC): An attempt to program a FPDC on a FLEX DSS

button (rather than a PDC) results in Reorder Tone.

Pooled Facilities: A pooled facility access code may be stored on a FLEX DSS button (but not on a DSS button). If so, the button will function very much like a Direct Facility Access button, with the capability of receiving a busy-to-idle reminder for the pooled facility. However, this button will not allow access to a dial-restricted facility.

Administration Requirements

Assign DSS and/or FLEX DSS buttons at voice terminal.

Hardware Requirements:

None

2-131

Page 152
Image 152
AT&T AT&T manual Administration Requirements, 131