AT&T AT&T manual 205

If a station is translated to not send ringing to coverage	when calls to this station
are unanswered, the Send All Calls feature overrides this	instruction (ringing will b e
sent).

If a covering station activates Send All Calls, the station is removed from the coverage path completely. Coverage calls will not be directed to the station.

●Call Coverage —Group:If a station with Send All Calls activated has group

coverage and all the coverage receivers are busy, a call waits at the station while the system checks for an idle receiver every five seconds. When one becomes available, the call is directed to the covering station.

●Call Coverage —Individual:If a station with Send All Calls activated has only individual call coverage and all coverage receivers are busy, a call stays at the

station; it does not go to coverage.

●Distinctive Ringing: Normal audible ringing is turned off for incoming calls when

Send All Calls is activated, unless single-ring reminder is administered.

●Hands-Free Answer on Intercom: Activating Send All Calls will cause an active AUTO ANS button to turn off. As long as the Send All Calls feature is in use, AUTO ANS cannot be turned on.

●Line Status Indications: The line status lights still flash for incoming calls when Send All Calls is in effect even though normal ringing is cut off. The lights stop

flashing when the calls are answered by a covering station or dropped by the caller.

●Personal Line: Ringing on Personal Lines is turned off by activation of Send All Calls whether the station is the principal (owner) of the line or not. Personal Line calls follow the coverage arrangements of the principal station. If the principal station is not covered, the call will simply stay at the principal station until dropped (even if other stations with that Personal Line have coverage).

Administration Requirements

Voice Terminal:

● Assign Send All Calls button

●Assign single-ring reminder if required.

Hardware Requirements

None

2-205