AT&T AT&T manual User Changeable Options Definition, 253

USER CHANGEABLE OPTIONS (V2)

D e s c r i p t i o n

User Changeable Options allows a data terminal user who is in the Command Mode to view and change the settings of certain data port options. This feature is available to users of Data Line CP ports; users of STARLAN Interface CP ports cannot change their port options. Table 2-J contains brief descriptions of the user changeable options.

TABLE 2-J. User Changeable Options

Option

Definition

Speed		low, 300, 1200, 2400, 4800, 9600, 19200, autobaud
Parity		odd, even
Permit	Mismatch	Allows two data endpoints to communicate at
		different rates.
Local Echo		Determines whether characters from the data
		equipment will be echoed by System 25 during
		Command Mode.
Answer	Text	Enables call progress messages to be displayed at
		the called data endpoint.
Connection Indication		Determines whether users who have Command
		Mode enabled will receive the “CONNECTED”
		message when a connection has been made.
Recall	Sequence	Two short breaks or one long break; the sequence
(disconnect)		used to disconnect a data call.

Note: T h e S y s t e m A d m i n i s t r a t o r m a y , u n d e r d a t a p o r t a d m i n i s t r a t i o n , deny permission for users of specific data ports to self-administer these options.

The user selects the Options menu from the Command Mode entry level menu. (Figure 2-51illustrates all available Command Mode menus. ) The user now has the choice of viewing options, changing options, or exiting the Options menu.

2-253