Call Accountability: When a station user dials ##PDC to provide accountability for a call and then dials the desired digits, the ##PDC is not saved by the Last Number Dialed feature.

Conference: When a station user adds a party to a conference, the number dialed is saved as the Last Number Dialed.

Direct Station Selection (DSS): Numbers called using an DSS or Flex DSS button are not saved by the Last Number Dialed feature. The number currently

stored by Last Number Dialed is not changed by operations of these buttons.

Personal Lines: When a user originates a call from a Personal Line, only the digits dialed after the line is accessed are saved by the Last Number Dialed feature. The same type of line must be selected to get dial tone for placing another call using Last Number Dialed. If a different type of line is used, the call may be directed to the wrong destination.

Pooled Facility—Direct Access: When a user originates a call from a Direct

Facility Access button, only the

digits dialed after the line

is accessed are

saved

by

the

Last

Number Dialed feature.

The same type of button

should be selected to

get

dial

tone

for placing another call

using Last Number Dialed. If a different

type

of

button is

used, the call may not

be

directed to the right destination.

 

 

Repertory Dialing: When using a Repertory Dial button to place a call, the numbers dialed are saved by Last Number Dialed. When the call is redialed using Last Number Dialed, the same type of button where dial tone was originally accessed should be used again to ensure that the call is directed to the correct destination.

Speed Dialing: When using a Personal or System Speed Dialing code to place a call, the code is saved by Last Number Dialed. When the call is redialed using Last

Number Dialed, the same type of button where dial tone was originally accessed should be used again to ensure that the call is directed to the correct destination.

System Access/System Access Originate Only Buttons: If a user originates a call from one of these buttons, the same type of button should be selected for getting

dial tone to place a second call with the Last Number Dialed feature. Using another

type. of button, such as Personal Line or Direct Facility Access, to get dial tone may

prevent the call from completing properly.

Transfer: When a station user Transfers a call, the dialed number (of the party to whom the call is transferred) is saved as the Last Number Dialed.

Administration Requirements

Last Number Dialed is a default feature on all multiline voice terminals in a V2 system. One button is assigned to the feature at each set. The feature can be moved/removed by administration.

Hardware Requirements

None

2-154

Page 175
Image 175
AT&T AT&T manual 154