AT&T AT&T manual Char Used in Personal Speed Dialing Numbers, Transmits an actual, 195

Special Characters (V2)

The following special characters may be used in Repertory Dialing and Personal Speed Dialing numbers on R1V2 systems only:

CHAR. USED IN REPERTORY DIALING NUMBERS

*Produces a 1.5 second pause. (Since System 25 does not have a Dial Tone detector, judicious use of the pause character will help to ensure that intermediate Dial Tones are obtained before more digits are sent. )

#* Transmits an actual “*”.

##Transmits an actual “#”.

#1 x x Represents a System Speed Dialing code (where xx = 00-89) or a Virtual Facility code (where xx = 90-99). If using a Virtual Facility

code, it may appear only at the beginning of the stored number.

# 2 x Represents a Personal Speed Dialing code (where x = 0-6).

#3 M a r k s t h e b e g i n n i n g o f E n d - t o - E n d S i g n a l i n g . ( S y s t e m b e g i n s transmitting touch-tone signals to the far end switch.)

CHAR. USED IN PERSONAL SPEED DIALING NUMBERS

*Produces a 1.5 second pause. (Since System 25 does not have a Dial Tone detector, judicious use of the pause character will help to ensure that intermediate Dial Tones are obtained before more digits are sent.)

#* Transmits an actual “*”.

##Transmits an actual “#”.

#1 x x Represents a System Speed Dialing code (where xx = 00-89) or a Virtual Facility code (where xx = 90-99). If using a Virtual Facility

code, it may appear only at the beginning of the stored number.

#3 M a r k s t h e b e g i n n i n g o f E n d - t o - E n d S i g n a l i n g . ( S y s t e m b e g i n s transmitting touch-tone signals to the far end switch.)

2-195