AT&T AT&T manual Administration Requirements, 251

Administration Requirements

Trunk Port:

● Assign	Trunk Type And Number
● Assign	Class Of Service Code [DID - (l-4); Other - (0-15)]
● Assign	Facility Access Code - Default (See Note)
● Allow	Dial Access (Yes, No) - Default = Yes
● Assign	To DGC Group (Group Number 1-32, or O for none) - Default = ✐
● Make	This a Directed Night Service Trunk (Yes, No) - Default = Yes

●Assign Night Service Delay Announcement (Announcement 1 or 2 or 0 for none) - Default = 0

● Dial-Inward Capability (Tone or Pulse) - Default = Pulse (Tie trunks only).

N o t e : Default Facility Access Codes are based on the CPs in a system. Defaults are assigned as follows:

●Loop Start Trunks - 100

●Ground Start Trunks - 101

●Tie Trunks - 102.

Hardware Requirements

Associated trunk port interfaces.

2-251