PERSONAL DIAL CODE (PDC)

Description

Each station is assigned a PDC. The user may log in the PDC at any other voice terminal, and calls to the PDC will follow the user.

A PDC can be assigned to a convenience voice terminal (i.e., not associated with a particular user) and to data terminals with modems. Digital data endpoints are assigned Data Dial Codes (DDCs).

There are two types of PDCs:

PDCs: Assigned to users with their own voice terminal (referred to as the “home terminal”). To use the PDC at another voice terminal, the PDC may be logged-in there.

Floating PDCs (FPDCs): Assigned to employees who do not have their own voice

terminal and

to visitors who will be receiving calls. Calls to an FPDC will ring at

the terminal

where it is logged in, or, optionally, at the Attendant Console if the

FPDC is not logged in anywhere.

Up to 200 PDCs and

300 FPDCs can be assigned in a system.

Note: The following call types are station oriented. They do not redirect to an “away terminal.”

Automatic

Intercom Calls

Directed

Night Service Calls.

DSS Calls (V1 only)

DGC Group Calls

Manual Signaling

Message Waiting

Personal Line Calls

Calls Placed to A PDC:

If the PDC is either logged in at its home terminal or is not logged in anywhere, a call to the PDC will simply be directed to the home terminal and will receive that terminal’s normal hunting or call coverage treatment.

If the PDC is logged in at another terminal, then that terminal is termed the “away terminal.” There are two cases to consider when a call is placed to this PDC:

Call not placed from the away terminal (the general case)

Call placed from the away terminal (a special case).

(1)Call Not Placed from The Away Terminal (the general case): The call will first be directed to the away voice terminal. Ringing will occur at the away terminal if it is an on-hooksingle-line voice terminal or if it is a multiline voice terminal with an idle System Access button.

2-181

Page 202
Image 202
AT&T AT&T manual Calls Placed to a PDC, 181